|
Tetracam's Wireless Camera Interface (WCI) enables
mobile devices to exchange data and control commands with all Tetracam camera
models wirelessly.
The Tetracam Wireless Camera Interface (WCI) has the following
characteristics:
Compatible
with all Bluetooth®
mobile
devices (e.g., cell phones, tablets, laptops and desktop
computers)
Frequency:
2400–2480 MHz
Max. Range:
10 meters (32.8 feet)
Compatible
with ADC, ADC Air, ADC Lite, ADC Micro and Mini-MCA Systems
(see Configurations below)
Compatible
with Tetracam's free Android App
S-Link
Enables Camera to accept GPS coordinates, aircraft attitude
data (angles of rotation in three dimensions about the
vehicle's center of mass known as roll, pitch and yaw) and
remote shutter commands from cell phones, tablets, etc.
When
installed, uses camera's RS232 interface (disabling alternate
serial interface ports); serial data/commands must be
input/output through WCI
Power: Supplied by the camera
Weight (Configuration-dependent)
ADC Lite WCI
≈ 20
grams (0.044 pound)
ADC Micro WCI (Molex)
≈
45 grams (0.1 pound)
ADC Micro WCI (Molex
Feed-Through) ≈
45 grams (0.1 pound)
ADC, ADC Air & Mini-MCA
WCI (Hirose ) ≈
60 grams (0.132 pound)
ADC, ADC Air & Mini-MCA
WCI (Hirose Feed-Through) ≈
75 grams (0.165 pound)
Standard Wireless Camera Interface Configurations
-1 ADC Lite WCI
|
-2 ADC Micro WCI (Molex)
|
-3 ADC Micro WCI (Molex Feed-Through)
|
-4 ADC, ADC Air & Mini-MCA WCI (Hirose)
|
-5 ADC, ADC Air & Mini-MCA WCI (Hirose Feed-Through)
|
|
|